News
Pocket Door Steel Studs - Half Kits or Full Kits For our 2450 Series & 2650 Series Pocket Door Frame Kits
Posted by Melissa Demarco-Seidle on
Pocket Door Steel Studs - Half Kits or Full Kits ***For our 2450 Series & 2650 Series Pocket Door Frame Kits Heavy Duty All Steel Studs 3/4”x1 1/2” *Recommended for Walls where customer wants to add Shelves or Tile on one side of the Wall Other Company’s supply Steel Wrapped Pine studs with their kits. Our Heavy Duty All Steel Studs are many times the strength of theirs. We added the hardwood nailing strips to the front Studs, so that you can attach Pocket Door Jambs easily. HALF SET includes the following: 2- All Steel Upright Studs 1- Galvanized Steel Floor Bracket with...
Inswing Threshold Extenders- Finishes: Mill/ Silver Color OR Dark Bronze
Posted by Melissa Demarco-Seidle on
Inswing Threshold Extenders- Finishes: Mill/ Silver Color OR Dark Bronze If you need that extra width on your Exterior Threshold due to wider jambs, you can use these Extenders. Our Threshold Extenders attach to our 5 5/8" thresholds and are only compatible with our Endura thresholds. ***NOTE: These Threshold Extenders only fit our Endura 5 5/8" wide thresholds.
Questions About Pocket Door Frame Kits from Hartford Building Products
Posted by Ronald Seidle Jr on
Question #1 - What are the rough opening measurements for our frame kits? The rough opening measurements needed for all our frame kits are as follows: Width of a Single kit - Double the door width plus one inch. Width of a double door unit - Four times the door width Height - Door Height plus 2 1/2" Question #2 - What is the difference between our 2450 and 2650 pocket door frame kits? The 2450 pocket door frame kits are the kits needed for 2 x 4 walls. The 2650 pocket door frame kits are the kits needed for...
Pocket Door Track & Hardware Kit with Soft Close and Soft Open
Posted by Melissa Demarco-Seidle on
Series 1- HBP- Heavy Duty Pocket Door Track & Hardware *With SOFT CLOSE & SOFT OPEN For 2 x 4 or 2 x 6 Interior Wall Construction 1-DOOR Set Contents: 1 – Extruded Aluminum Track 1 – 4 Wheel Soft Close 1 - 4- Wheel Soft Open 2 - Door Guides 1 - Wrench For 1 3/8” or 1 3/4” Thick Doors NOTE: Minimum door thickness of 1” In stock, ready to ship https://www.hartfordbuildingproducts.com/collections/track-hardware/products/series-1-hbp-heavy-duty-pocket-door-track-and-hardware-with-soft-close-and-soft-open
Pocket Door Frame Kit
Posted by Melissa Demarco-Seidle on
When you have a Laundry Room in a closet and want a clean view, install a Pocket Door for that finished look. Look how much space this saves you. If you have a smaller home, moble home, or an RV, this would be perfect for your Washer and Dryer. Check our our Pocket Door Frame Kits. https://www.hartfordbuildingproducts.com/pages/about-our-pocket-door-frame-kits